Special Feature:
Double side exfoliation type tape using polyster film as basic material.
The strength of adhesiveness due to the difference in the strength of adhesiveness between the inner side and outer side.
It can be used on the different type of adhesion surface.

Structure:

THICHKNESS: BODY OF TAPE 85±10μ

Specification:

Weak adhesion side 1,000 (g/25m)
Strong adhesion side 2,000 (g/25m)

• ※ against stainless the adhesiveness after 20 hours
• ※ 180 degree peeling
• The above value is only for testing but not under guarantee

The value of adhesiveness of TL-83S-LU

Unit: g/25mm
(In order to have best adhesivness, it is advised to use after 20 hours attached)

2. Physical properties for other model:

※These value are obtained by measurement; there are not guarantee the measurement value.
※Measurement conditions:180°-fold peeling; pressure application by a single stroke of a 2kg roller; a 20mm wide stainless steel plate sample to which the tape is adhered; stretching rate of 300mm/min.; and 24-hour exposure to normal temperature.